SUS304 Spring Washer M4/M6/M8/M10/M12

SUS304 Spring Washer M4/M6/M8/M10/M12 are important for keeping nuts, bolts, and screws tight, especially when things are shaking or moving around. Made from SUS304 stainless steel, they're tough and won't rust easily, which is great for things like solar panel setups and other outdoor stuff.

Brand:

SIC SOLAR

Item NO.:

SIC-SW

Installation Site:

Roof or Ground

Color:

Natural

Material:

SUS304

Warranty:

10 years and 25 years service time

Wind Load:

<60M/S

Snow Load:

<1.4KN/M2

Technical Details Installation Guide Package Advantage

Name	SUS304 Spring Washer M4/M6/M8/M10/M12
Installation Site	Roof or Ground
Wind Load	<60M/S
Snow Load	<1.4KN/M2
Material	SUS304
Color	Natural
Anticorrosive	Stainless steel
Warranty	10 years and 25 years service time

1️⃣ Pick the Right Size: Get a spring washer that matches your bolt or screw size (like an M6 washer for an M6 bolt).

2️⃣ Put the Washer in Place: Stick the washer between the nut or bolt and whatever you're screwing into (you can add a flat washer too).

3️⃣ Tighten It Up: Tighten the bolt until the washer gets a little squished, so it's springy.

4️⃣ Double-Check: Make sure the washer is still springy but not totally flat.

Solar bracket package

☆ You can get different nut styles if you need them.

☆ Super Tough – Made with strong AL6005-T5, so they come with a 10-year and should last for 25 years.

☆ Smart nut design – you can slide these Tilt-in-module nuts anywhere on the rail.

Related certificate

☆ Quality certificate for the aluminum.