What Are You Looking For?
This Dual Tilt Aluminum Solar Ballasted Mounting is a great, strong option for solar panels, particularly for businesses that want to get the most energy possible. The tilt lets you catch sunlight better.
Brand:
SIC SOLARItem NO.:
SIC-FDB2Installation Site:
Flat roof or groundPanel Orientation:
HorizontallyTilt Angle:
10 degree / 15 degreeColor:
NatureMaterial:
AL6005-T5Wind Load:
<60m/sSnow Load:
<1.4kn/m2
You can put Dual Tilt Aluminum Solar Ballasted Mounting on flat roofs or the ground. It's made of light aluminum, so it's quick to set up and won't damage the surface it's on.
Dual Tilt Aluminum Solar Ballasted Mounting lets panels face east or west on flat roofs or open ground. It uses weight to hold things down, so you don't have to drill into the roof. Good for keeping the roof in good shape while getting the most power.
1️⃣ Check the Roof: Make sure the flat roof can handle the weight.
2️⃣ Plan it Out: Set up the panels to use space well and reduce blockage.
3️⃣ Build the Frame: Follow the instructions to put together the aluminum frame.
4️⃣ Put in the Panels: Line up the panels and tilt them right.
5️⃣ Add Weight: Put the needed weight based on wind.
6️⃣ Check it Over: See if it is stable, safe, and put together well.
1.Locate the rails, front legs and rear legs according to our drawing.
2.Put two ballast pan under each panel, and then put on the concrete ballast.
3.Fix the solar panel on ballast mounting structure by clamps.
4.Finished.
East-West Solar Ballasted Mounting System is a cool way to get more juice out of solar panels on fla...
Read More
Metal Roof Aluminum Short Rail Mounting System is a solar panel mounting option designed specificall...
Read More
You can change how high or low these Galvanized adjustable ground screw sit even after you've put th...
Read More
Flat Concrete Tiles Twist Solar Roof Hook is a mounting part made to secure a PV system on roof...
Read More
SIC Twist Adjustable Photovoltaic Tile Roof Hooks are designed to secure rails to Roman tiles. Made ...
Read More
Solar Panel Rail End Clamp with T-Bolt is designed to secure the outer edges of solar panels to comp...
Read More
Solar PP Ballasted Ground Mount Bracket is a tough and new way to mount solar panels on the ground. ...
Read More
Rail Connector for Solar Ground Rail RV3 is important because it links two pieces of ground-mounted ...
Read More
IPv6 network supported
English 
Deutsch
español
português
Nederlands
العربية
日本語
한국의
Melayu
Tiếng việt
