
| Name |
Slate roof solar mounts hooks |
| Material |
SUS304 |
| Metal sheet thickness |
≧4mm |
| Warranty |
10 Years warranty and 25 Years lifetime |
| Applicable site |
Roof |
| Range of bolt torque |
25-28N*m |
| Value of pullout resistance |
5KN |
Value of pressure resistance
|
5KN
|
1️⃣ First, find where your roof rafters are. Mark the spots where you'll attach the hooks under the slate.
2️⃣ Gently lift or cut the slate tiles to create room for the hooks.
3️⃣ Fasten the hooks to the rafters with screws or bolts made of stainless steel.
4️⃣ Put the slate tiles back, making sure the hooks are still showing.
5️⃣ Finally, put up the rails, then use clamps at the middle and ends to hold the panels in place.

☆ We offer many different slate hooks that fit all kinds of slate roofs, and they won't damage your roof.
☆ We use good quality Stainless steel 304, so we can promise they'll last for at least 10 years and often much longer, up to 25 years.
☆ Our double adjustable hooks come already put together, which saves you time and money when you're installing them.
☆ We've tested the whole setup carefully to make sure it can handle really bad weather.
Related Certificate
☆ We have a CE Certificate for our solar tile hook roof mounting system.
☆ Our hooks, made of SUS304, have an SGS Certificate.
☆ And our screws, also made of SUS304, have an SGS Certificate too.
Q1. What's the material of solar roof hook?
It is stainless steel 304, which is named A2 or stainless steel 1.4301 in Europe.
Q2. What's the thickness of your tile roof hooks?
As usual, the bottom plate thickness of hooks is 4/5mm, and the Arm thickness is 5/6mm.
For sure, other thickness or spec. can be customized.
Q3. What's the Surface treatment of your A2 roof hooks?
Sandblasted, not Sandblasted, and Passivation are available.
Q4. Are these hooks pre-assembled before shippment?
Yes, All solar roof hooks will be pre-mounted before shippment.
Q5. Is it include wooden screw and nut?
Yes.
Q6. Can the solar hooks be customized?
Yes.