Solar slate roof hook

Click here to learn more roof hook

1️⃣ Locate the wooden rafters beneath the slate roof.

2️⃣ Carefully remove or cut the slate where the hook will be placed.

3️⃣ Secure the hook directly to the rafter using stainless steel screws.

4️⃣ Reposition the slate to maintain the roof's waterproofing, leaving the hook arm exposed.

5️⃣ Attach the aluminum rail to the hook, then secure the solar panel using the center and end clamps.

Advantages as follow:

☆ Customized Slate roof hook size – Do not harm the slate roof sheet. 

☆ Height adjustment (40mm, From 130mm to 170mm)
☆ High Durability – Best Stainless steel 304 Ensure 10 years warranty and 25 years service time.
☆ High Pre-assembly – Save labor cost at the installation site

Related Certificate

Our CE Certificate for solar tile hook roof mount system

Our SGS Certificate for hook material -- SUS304

Our SGS Certificate for screw material -- SUS304

Q1. What's the material of solar roof hook?

It is stainless steel 304, which is named A2 or stainless steel 1.4301 in Europe.

Q2. What's the thickness of your tile roof hooks?

As usual, the bottom plate thickness of hooks is 4/5mm, and the Arm thickness is 5/6mm. 

For sure, other thickness or spec. can be customized. 

Q3. What's the Surface treatment of your A2 roof hooks?

Sandblasted, not Sandblasted, and Passivation are available.

Q4. Are these hooks pre-assembled before shippment? 

Yes, All solar roof hooks will be pre-mounted before shippment.

Q5. Is it include wooden screw and nut? 

Yes.

Q6. Can the solar hooks be customized? 

Yes.