Thin film solar panel end clamp

Thin film solar panel end clamp are getting quite popular because they're light, flexible, and work well for certain uses. But to put these panels in right and make sure they stay put, you need special parts. These end clamps are made just for attaching thin film panels to the mounting rails. They help keep the panels firmly in place for as long as they last.

Brand:

SIC SOLAR

Item NO.:

SIC-EC-TF

Installation Site:

Roof or Ground

Material:

AL6005-T5 & SUS304 & EPDM

Warranty:

10 years and 25 years service time

Wind Load:

<60M/S

Snow Load:

<1.4KN/M2

Components Technical Details Installation Guide Package Advantage FAQ

Click here to learn more metal roof clamp

End Clamp Solar Panel

Components	Aluminium body,A2-70 Bolt, EPDM Rubber
Applicable Module	6-9mm frameless thin film solar module
Length	80mm, 120mm, 150mm, 200mm or customized length
Color	Siliver or black anodized
Standard	AS/NZS 1170.2, JIS C 8955:2011

1️⃣ Put the module in place – Just lay the thin-film solar panel onto the mounting rail.

2️⃣ Attach the end clamps – Fasten the end clamps onto the module's outer edge.

3️⃣ Make sure it's even – Adjust the end clamps so the pressure spreads out evenly on the glass.

4️⃣ Tighten everything up – Use stainless steel bolts to really secure the end clamps.

5️⃣ Do it again – Put end clamps on both sides of every row of modules.

Solar bracket package

☆ The inside rubber is good – This really protects your thin film solar panels well.

☆ Flexible use – It works for thin film solar panels that are anywhere from 6mm to 9mm thick.

☆ Built to last – The high-quality AL6005-T5 material is designed to last a long time, usually coming with a 10-year warranty and a 25-year service life.

Related certificate

☆ Aluminum quality certificate – This shows the AL6005-T5 composition.

Q1. Can the bolts also be made black ?

Yes.

Q2. Can the clamps be customized ?

Yes.