Tile Roof Hook 3 Times Adjustable Long Version

Click here to learn more hooks

1️⃣ First, gently lift the roof tile where you want to put the hook.

2️⃣ Then, screw the hook's base firmly into the rafters using stainless steel screws.

3️⃣ Next, use the slots on the hook to get the height and angle just right.

4️⃣ Carefully put the tile back in place, resting it on the hook.

5️⃣ After that, attach the mounting rail using bolts and nuts to hold it tight.

6️⃣ Finally, secure your solar panels with the middle and end clamps.

Standard package is cartons with plywood pallet as below. Wooden case could be offered if needed.

☆ You can adjust the height by 39mm, moving it anywhere from 130mm to 169mm.

☆ It's super durable – made from top-grade Stainless steel 304, which typically comes with a 10-year warranty and should last about 25 years.

☆ Most of it comes pre-assembled, so it helps you save time and money on labor when you're installing it.

Related Certificate

☆ We have a CE Certificate for our solar tile hook roof mount system.

☆ Our hook material, SUS304, has an SGS Certificate.

☆ And the bolt material, also SUS304, has its own SGS Certificate.

Q1. What's the material of solar roof hook?

It is stainless steel 304, which is named A2 or stainless steel 1.4301 in Europe.

Q2. What's the thickness of your tile roof hooks?

As usual, the bottom plate thickness of hooks is 4/5mm, and the Arm thickness is 5/6mm. 

For sure, other thickness or spec. can be customized. 

Q3. What's the Surface treatment of your A2 roof hooks?

Sandblasted, not Sandblasted, and Passivation are available.

Q4. Are these hooks pre-assembled before shippment? 

Yes, All solar roof hooks will be pre-mounted before shippment.

Q5. Is it include wooden screw and nut? 

Yes.

Q6. Can the solar hooks be customized? 

Yes.